i-meter DCC-9
i-meter DCC-9, is an EV Energy Management System specifically designed to allow the connection of a charger to the main feeder of the panel without affecting the load capacity limit of the feeder.
Ideal for the installation of chargers in single-residential units. Thanks to its NEMA 3R outdoor enclosure it is also suitable for outdoor installations.
How it works:
- i-meter DCC-9 allows the connection of any EV charger to a fully loaded panel by managing the energy available at any given time
- It detects when the total power consumption of the main circuit breaker exceeds 80% and at that point temporarily de-energizes the charger
- When the i-meter DCC-9 detects that the total power consumption of the electrical panel, including the load of the EV Charger, is less than 80% for more than 15 minutes it automatically re-energizes the charger
- Can be ceiling or wall mounted
The i-meter DCC will only allow power to be delivered to the EV charger if the total demand of the panel is below its full capacity. The new i-meter DCC-9 has the ability to receive and transmit load shedding instructions from an external energy management system via a dry contact input and output.
Features:
- Ideal when no more breaker slots are available in a panel
- Does not affect the limit set by the load calculation of the main distribution panel
- It is installed downstream from the Utility Meter, accounting for the EV Charger consumption in the bill
